Spring Clamp Manufacturer

Steel Cone Exporter

PVC Type Steel Cone manufacturer

Shuttering Clamps Exporter india

Concrete Clamps manufacturer india

Universal Clamp india

Timber Walling Clamp india

Spring Clamp Manufacturer Steel Cone Exporter PVC Type Steel Cone manufacturer Shuttering Clamps Exporter india Concrete Clamps manufacturer india Universal Clamp india Timber Walling Clamp india Spring Clamp Manufacturer Steel Cone Exporter PVC Type Steel Cone manufacturer Shuttering Clamps Exporter india Concrete Clamps manufacturer india Universal Clamp india Timber Walling Clamp india
Vaishnav Home
22 Products                     |  Pages: 4 of 4   |                 |  Page: 1 2 3 4   |

Spring Clamp

FA-1016
Joint Pin Made from Low Carbon Steel.
The Safe Working Load is 90 KN.		 Spring Clamp Manufacturer Used for Deformed Bars
of 6mm - 10mm.

Steel Cone

FA-1017
Base Plates Made from Low Carbon Steel.
The Safe Working Load is 90 KN.		 Steel Cone Exporter Threading is suitable for
15/17mm tie rod.
The available lengths
is 75mm and 100mm.

PVC Type Steel Cone

FA-1018
Forged Frame Pin Made from Low Carbon Steel
with PVC Cove.
The Safe Working Load is 90 KN. 		PVC Type Steel Cone manufacturer Threading is suitable for
15/17mm tie rod.
The available length of 100mm.

Shuttering Clamps

FA-1019
Normal Frame Pin Made from Low Carbon Steel.
The Safe Working Load is 90 KN. 		Shuttering Clamps Exporter india Available in the following sizes:
Width from 25mm to 32mm,
Thickness from 4.5mm to 8mm and
Length of the Clamp from
600mm to 1200mm

Concrete Clamps

FA-1020
Normal Frame Pin Made from Low Carbon Steel.
The Safe Working Load is 90 KN. 		Concrete Clamps manufacturer india Available in lengths
of 600, 800, 1000,1200, 1400
and 1700mm

Universal Clamp

FA-1021
Normal Frame Pin Made from Low Carbon Steel with
a Carriage Bolt, Nut and Washer.		 Universal Clamp india The carriage bolt is M12 X 120mm.

Timber Walling Clamp

FA-1022
Normal Frame Pin Made from Low Carbon Steel with
a L-Bolt, Nut and Washer.		 Timber Walling Clamp india The L bolt is M16 X (5 inch + 6 inch)

Surface Finish :
All the Products are available in Natural, Electroplated, Hot Dip Galvanised and Painted condition.

Note : Please ask for any other Technical Specifications of the products.

Previous Page

Quick Links

Other Products

Copyright © 2010 Vaishnav Engineering Works All Rights Reserved

DAS Registered - ISO 9001:2000 UKAS Quality Management